New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fresno pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Windows & Doors in Selma, CA | Meridian Windows and Doors Fresno
We provide independent ECO Window Systems service across Selma, from single-sash repairs on 1960s ranch homes to full-bank replacements on newer builds. What makes our work here different is simple: we know which ECO models fail in Selma’s hard water and dust, and we give you a written price before any work starts. Call (559) 272-4716 to schedule a free estimate. We’re at ECO Window Systems sales & service depth because we’ve been pulling these frames apart for years.
Why Selma Residents Choose Us for ECO Window Systems Service
Selma homeowners don’t need a lecture about the Central Valley sun. They need someone who knows that an ECO Classic aluminum frame from 1972 has probably corroded at the bottom rail, and that a failed thermal break means your air conditioner is fighting a losing battle. Elliot Vance, our owner, learned the trade at Los Angeles Trade-Technical College and has spent decades working on exactly the kind of mid-century window stock that dominates Selma’s east side. When we quote a repair or replacement, we write it down, and we stand behind it for a full year. “Measure twice, install once, write it down,” as Elliot puts it. That’s how we run every job in Selma service area.
Common ECO Window Systems Windows & Doors Problems We Solve in Selma
- Fused or corroded aluminum sashes in ECO Classic frames. Decades of hard water and high UV in Selma turn the aluminum channels into a white crust. Sashes seize up, and homeowners force them until the handle snaps. We see this on ranch homes east of Highway 99 constantly.
- Failed polyurethane thermal breaks in older ECO aluminum windows. When the thermal break degrades, heat transfers straight through the frame. Your glass could be fine, but the window still radiates July heat into the room. Condensation forms on the interior frame, and cooling bills climb.
- Warped or brittle vinyl in early ECO 7000 Series sliders. Prolonged Central Valley sunlight breaks down older vinyl formulations. The sashes warp, gaps open at the meeting rail, and Selma’s dust finds every opening. You’ll notice grit on the interior sill within days of cleaning.
- Worn or disintegrated wool pile weatherstripping on ECO sliders. The wool pile dries out, flattens, and eventually crumbles. Dust coats the track, the rollers jam, and the door drags. We replace it with aftermarket pile rated for desert dust and UV when OEM stock isn’t available.
- Failed rollers in ECO sliding glass doors. Selma’s fine dust works into the roller bearings and grinds them down. Doors that once slid with two fingers now take a shoulder. We clean, replace, and realign so the door tracks true.
ECO Window Systems Service in Selma: What Local Conditions Mean for Your Equipment
Unlike neighboring Fresno or Kingsburg, Selma’s pre-1980 ranch homes east of Highway 99 often have entire window banks with original ECO aluminum frames that have corroded at the bottom rail from decades of irrigation overspray and hard water. We regularly quote full-bank replacement rather than piecemeal sash swaps because the frames themselves are the failure point, not just the moving parts. You can replace a sash, but if the frame channel is pitted and swollen, the new sash binds within a season. On Rose Avenue and similar east-side streets, we’ve pulled ECO Classic single-hungs where every lower sash was seized, and the aluminum channels had corroded into a crust that ate the nylon rollers. In those cases, we’re direct: a repair won’t hold through one Selma summer. A full-frame swap to ECO Thermal Break casements with stainless hardware makes more sense, and it’s what we recommend with our Window Replacement in Selma.
ECO Window Systems Models & Products We Service in Selma
We service the ECO Classic Aluminum Single-Hung, the ECO 7000 Series Vinyl Slider, the ECO Thermal Break Casement, and the ECO Monterey Garden Window. For warranty-backed repairs, we use OEM ECO hardware and glass whenever it’s available. For out-of-production lines, we fit proven aftermarket rollers, locks, and weatherstripping rated for desert dust and UV. We stock common ECO rollers, locks, and wool pile locally so Selma turnaround is measured in days, not weeks. If frame corrosion or a failed thermal break means a repair won’t survive a full summer, we tell you that plainly and quote Selma Window Installation instead.
ECO Window Systems Service Pricing in Selma
Most single-window repairs in Selma run $180 to $340 installed, depending on the failure. Weatherstripping replacement on an ECO 7000 Series slider typically lands between $90 and $160 per panel. Full-frame replacements on older ECO aluminum windows range from $600 to $1,200 per opening, depending on size and whether we’re matching existing trim. Full-bank replacements on a 1960s ranch home often run $3,000 to $7,000 for a full elevation. Your free estimate includes a written line-item price before any work starts, and that price doesn’t move at the door. Call (559) 272-4716 for an exact quote. Estimates are free.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – ECO Window Systems Windows & Doors in Selma
If the vinyl sash itself is straight and the glass is intact, we can replace the wool pile weatherstripping alone, usually for $90 to $160 per panel. If the sash has warped from years of Central Valley sun, new weatherstripping won’t seal the gaps, and you’re better off replacing the sash. We’ll tell you which applies before any money is spent. Call (559) 272-4716 for a free assessment.
The wool pile weatherstripping in older ECO aluminum frames degrades and flattens, leaving a gap between sash and frame. Selma’s fine dust works through that gap and coats your interior sill. It’s rarely a glass problem. We replace the pile with aftermarket material rated for desert conditions, and the dust stops.
If the glass is cracked or the seal has failed and moisture is building between panes, we usually recommend replacing the entire garden window. The Monterey’s frame is difficult to reglaze cleanly in the field, and a repair often costs 70 percent of a new unit while lasting half as long. For exact pricing, call (559) 272-4716.
Yes. Selma’s dust grinds down the original rollers until they seize or wobble. We replace them with sealed-bearing rollers rated for dust and grit, clean the track, and realign the door. Most jobs run $150 to $300 and are done in one visit. Call (559) 272-4716 for a quote.
They hold up better than standard glass and much better than old single-pane aluminum. Impact-resistant laminated glass doesn’t shatter under flying debris, and proper weatherstripping keeps the dust out. For full details on impact-rated ECO options, call (559) 272-4716 and ask for Elliot.
Service Areas Near Selma
We serve Selma and the surrounding communities including Fowler, Dinuba, Kerman, and ECO Window Systems service in Fresno. We also cover Madera and ECO Window Systems service in Madera for ECO window and door repairs.
Book Your ECO Window Systems Service in Selma Today
Call (559) 272-4716 to schedule your free estimate. We’ll inspect your ECO windows, give you a written price, and explain exactly what’s wrong in plain terms. No pressure, no vague promises, just the straight story.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fresno, serving Selma since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fresno
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.