New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fresno pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Window Company in Selma, CA
Meridian Windows & Doors is the window company Selma homeowners call when original aluminum frames have finally warped, corroded, or stopped sealing against the heat. Most of Selma’s housing stock is mid-century ranch homes built between the 1950s and 1980s, and plenty of those houses still carry single-pane glass that does almost nothing against July sunlight or dust storms blowing off the agricultural land around town. We carry eight manufacturer lines so the product is matched to the house, not the warehouse. The price goes on paper before work starts, and it does not move at the door. Call (559) 272-4716 to talk through what you’re seeing.
Why Selma Homes Are Different
Selma sits squarely in the Central Valley heat belt, and the houses built here in the 1950s through the 1970s were framed with what was available and cheap at the time: aluminum single-pane windows and sliding glass doors. Fifty to seventy years later, the aluminum is often pitted and corroded, the weep holes are clogged, and the glass conducts heat straight into living rooms from about May through October. Seals break down fast under high UV, and hard water from local irrigation and municipal sources leaves mineral crust on frames and tracks.
The eastern neighborhoods around Rose Avenue and Floral Avenue have large lots and long ranch facades where window banks stretch across the front of the house. When one window fails, the rest are usually not far behind, because they were installed the same year, by the same crew, from the same stock. We also see a lot of sliding patio doors in Selma that no longer lock properly because the track has worn and the rollers have collapsed. A door that will not lock is not a window problem, but it is the same age, and often the same fix: replace it with a properly sealed unit rated for the sun exposure here.
Dust is the other Selma constant. A window that does not seat and seal tightly lets fine agricultural dust through at the sills and jambs every time the wind picks up. When we install in Selma, we pay close attention to the perimeter seal, because that is what keeps the dust outside where it belongs.
Our Main Selma Services
Two calls dominate from Selma homeowners: replacing entire banks of failed aluminum windows, and replacing sliding patio doors that no longer seal or lock. Each has its own Selma page with pricing, process details, and local specifics.
Window Replacement in Selma
Window replacement in Selma usually means pulling out corroded aluminum frames from a 1950s or 1960s ranch and setting new, properly flashed window units in their place. The original frames in the eastern subdivisions have had decades of hard water and intense sun working on them, and the glass itself is single-pane. We replace full banks more often than single sashes, because the rest are failing alongside the one that finally gave out. Manufacturers like PGT and CWS have products built for exactly this climate profile, and we specify the glass package accordingly. Full details, including line-item pricing, are on the Window Replacement in Selma page.
Window Installation in Selma
Window installation for new construction or additions in Selma has different demands than replacement work. Rough openings need to be square, flashed, and sealed before the unit goes in, and the perimeter seal has to hold against dust and 100-degree heat from day one. Selma’s summer temperature swings stress frames and seals fast, so the install method matters as much as the product. CGI and ES Windows both make units suited to high sun exposure and wind-driven dust, and we mount every unit to the manufacturer’s installation spec plus our own sealing standard. See the full writeup on Window Installation in Selma.
Patio Door Installation in Selma
Original sliding glass doors from the 1960s and 1970s are everywhere in Selma, and most have rollers ground flat, bent tracks, and locks that barely catch. A patio door that will not close fully is a heating bill, a dust entry point, and a security hole in the back of the house. We replace sliding doors with sealed, rated units that operate easily and latch with authority. Selma’s wind and dust make the frame seal the critical part of this job, and we treat it that way. Pricing and door options are on the Patio Door Installation in Selma page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
We hold eight manufacturer lines and have local parts access for units already installed across Selma. Among the brands we service and replace: PGT, CGI, CWS, and ES Windows, with the right line matched to the house and the exposure. Turnaround on parts and replacement sashes is typically faster because we’re not waiting on a third-party dealer. See our brands for the full list.
Pricing for Window Company in Selma, CA
| Service | Typical range in Selma |
|---|---|
| Single window replacement | $450 – $900 installed |
| Full window bank replacement (3 – 5 windows) | $1,400 – $4,200 installed |
| New construction window installation | $550 – $1,100 per opening |
| Patio door replacement (sliding) | $1,800 – $3,200 installed |
| Patio door installation (new opening) | $2,400 – $4,000 installed |
| Low-E glass upgrade per window | $120 – $310 added per unit |
| Impact-rated window replacement | $700 – $1,400 installed |
| Full home window package (8 – 12 windows) | $6,000 – $12,000 installed |
| Rot repair around window opening | $180 – $600 per opening |
| Sliding door roller and track replacement | $140 – $350 per door |
Sun exposure and frame condition are the two things that push Selma prices up most: full-bank replacements on eastern facade windows wear harder, and original aluminum often leaves rot or damage at the sill that must be repaired before a new unit will seat properly. Whatever the number ends up being, it is written down before work starts, and it does not change at the door or mid-job.
Neighborhoods We Serve in Selma
We work throughout Selma, including the older ranch-heavy subdivisions where window and door failures cluster hardest. Crews are scheduled from our Fresno office and serve Selma locally with no per-neighborhood minimums.
- Rose Avenue corridor
- Floral Avenue neighborhoods
- East Selma ranch subdivisions
- Downtown Selma area
- West Selma residential streets
Service Area – Cities Near Selma
Our Selma service area extends to the surrounding Central Valley communities. We also serve Fowler, CA, Reedley, CA, Sanger, CA, and Dinuba, CA, with the same written pricing and 365-day guarantee on every job.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Company in Selma
We schedule estimates around our Selma job routes each week, and most homeowners get on the calendar within a few business days. Our phones are answered by a live person around the clock, so call (559) 272-4716 and you will talk to a human about timing, not roll to voicemail.
Window replacement with the same opening size typically does not require a city permit, but adding a new opening for a patio door or enlarging a window often does. We handle the permit questions directly with the City of Selma for every job and include any permit costs in the written quote so nothing appears later by surprise.
Every install is covered in writing by the 365-Day Done Right Promise. If the window or door fails within that year, we come back and make it right at no charge, and a second visit is included free if the initial repair does not hold.
Six Reasons Homeowners Choose Meridian Windows and Doors Fresno
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Meridian Windows and Doors Fresno Services
What Neighbors Say About Meridian Windows and Doors Fresno
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Quoted fairly with the glass package explained. No hard sell."
- Gloria B."Straight talk, on time, and clean. Four windows done by early afternoon and the old frames were hauled away."
- Ed S."Crew trimmed the interior neatly and caulked the outside. Looks professional."
- Julia N.