New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fresno pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
ECO Window Systems Window Replacement: The Fresno Owner’s Guide
We stock and install ECO Window Systems-compatible window replacements throughout Fresno, and most single-window replacements run $480 – $920 installed depending on glass package, frame condition, and size. For a failed sash or fogged IGU, we can usually get the replacement fabricated and installed within 5 – 7 business days from the date we take measurements. Most homeowners discover the problem the same way: a window that won’t stay up, condensation trapped between the panes, or a draft that wasn’t there last winter. If your ECO Window Systems unit is fogging, sticking, or leaking air, the fix is usually a precise replacement, not a whole-house retrofit.
Key Takeaways:
- ECO Window Systems parts are dimension-specific: the frame depth, glass thickness, and balance type must match the original unit. Guessing gets expensive.
- We carry ECO Window Systems-compatible sashes, IGUs (insulated glass units), balances, and weatherstripping on our trucks, with same-week installation in most Fresno neighborhoods.
- Every replacement from our Fresno team carries a written 365-Day Done Right Promise. If it fails within the year, we return at no charge.
- We are an independent window and door contractor. We install and replace ECO Window Systems products, but we are not affiliated with ECO Window Systems corporate. That means we answer only to you, not a manufacturer’s warranty department.
Which ECO Window Systems Models This Applies To
ECO Window Systems produces a range of vinyl and aluminum window lines, and the replacement path depends heavily on which series you have. The most common units we see in Fresno are the ECO 2000 and ECO Elite series single-hungs and sliders, as well as fixed picture windows on newer subdivisions north of Shaw Avenue. Before you call, pull the small white label on the inside edge of the sash. It should list a series code and sometimes the original glass specifications. If the label is gone, we can still identify the unit from the frame dimensions, balance style, and glazing bead profile when we come out.
The real compatibility gotcha with ECO Window Systems is the balance system. Older ECO 2000 series units used a block-and-tackle balance; newer builds use a constant-force coil balance. They are not interchangeable. If you order a sash built for the wrong balance, the window will slam shut or refuse to stay open. We check the balance type before anything gets ordered. On the glass side, ECO Window Systems originals came with standard double-pane clear or low-E glass. For Fresno’s triple-digit summers, we typically spec a low-E replacement as an upgrade, because the difference in heat gain through clear glass versus low-E glass on a west-facing window is anywhere from 15 to 25 degrees in surface temperature by 4 p.m.
OEM ECO Window Systems parts exist, but lead times from the manufacturer can stretch two to six weeks, and the warranty on the part alone doesn’t cover labor to install it. We recommend high-quality aftermarket equivalents for sashes and balances: same dimensions, same performance rating, usually half the wait. We’ll always tell you what’s OEM, what’s aftermarket, and why we’d pick one or the other for your specific window.
Signs Your ECO Window Systems Window Replacement Is Failing
- Fog or condensation between the panes. The seal on the insulated glass unit has failed. Fresno’s heat cycles cause the spacer material to expand and contract, and after enough 100-degree days, any IGU can lose its seal. Once moisture is inside the glass, the window’s insulating value is pretty much gone.
- The sash won’t stay up or is getting stiff. The balance is worn or the pivot bar has slipped out of the shoe. With ECO Window Systems units, the coil spring inside the balance fatigues over time, especially on windows that face south or west and get ten hours of direct sun. When that spring fails, the sash either drops or binds on one side.
- You can feel air moving around the closed window. The weatherstripping has compressed or the sash is no longer seating square in the frame. This is often mistaken for a frame problem when it’s really a worn pile strip or a bent corner key.
- The sash has visible sag or won’t lock. The frame corner welds on some early vinyl models were the weak point. When the corner starts to separate, the sash racks slightly, and the lock won’t engage. This is a structural failure worth fixing before it affects the wall framing around it.
- Water staining on the interior sill after rain. The glazing bead or the sash-to-frame seal is compromised. In Fresno, we don’t get much rain, but when it does rain, water finds a failed weep system fast, and it’ll drain into the wall cavity if the window isn’t corrected.
Replacement Cost & What’s Included
In Fresno, a single ECO Window Systems sash replacement with standard clear double-pane glass runs $480 – $680 installed. A full IGU replacement on the same unit runs $390 – $560. If the frame is damaged or you want to upgrade to low-E glass with argon fill, the range moves to $620 – $920 for the complete sash and glass package. You’ll pay more for larger picture windows, anything above the first floor, or wall finishes that complicate trim access.
Every quote from Meridian Windows and Doors Fresno is a written, line-item price before any work starts. No change orders at the door. The price includes removal and disposal of the old sash or glass, installation of the new unit, and a full adjustment pass on the frame so it actually operates. Workmanship is covered in writing for 365 days. If it fails during that period, we come back at no charge. That’s the Done Right Promise, and it’s on paper every time.
- Sash replacement, standard glass: $480 – $680
- IGU only, standard glass: $390 – $560
- Sash replacement, low-E upgrade: $620 – $920
- Full frame replacement, standard size: $850 – $1,400
DIY or Call Us?
There are a few things an owner can safely check without a service call. You can confirm the sash label and series number, take a photo of both the window and the label, and check whether the window is fogged or simply dirty on the face. You can also determine if the lock is binding by lifting lightly on the sash while turning it. Those details help us quote accurately over the phone.
What you shouldn’t do is try to pull the sash out and replace a balance or coil spring yourself. Coil balances are under constant tension, and when they let go, they’ll take a chunk of vinyl frame or a finger with them. We’ve seen it. If the failure is inside the frame or the glass is cracked in a way that exposes sharp edges, leave it alone and call us at (559) 272-4716. Elliot Vance and our crew handle ECO Window Systems replacements the same way every time: measure twice, install once, write it down. The written price means you know the cost before we touch anything.
FAQs
Most ECO Window Systems insulated glass units last 12 – 18 years in the Central Valley’s climate. The extreme summer heat is the primary killer. South- and west-facing units tend to lose their seals at the lower end of that range, while north-facing windows often make it past year 20. The frame vinyl itself typically survives 30 years or more. If yours is fogging at year 10, that’s not unusual for a Fresno home.
Yes, in most cases. If the frame is intact and the failure is limited to the IGU or the balance, we replace the failed part. That runs $390 – $680 instead of $850 or more for a full frame swap. We only recommend full replacement when the frame corners have separated or the wall framing under the window has moisture damage. Get us a photo first, and we’ll tell you straight.
For a sash or IGU replacement on an ECO Window Systems unit, you’re looking at 60 – 90 minutes per window once the new part is in hand. Fabrication takes 5 – 7 business days. Full frame replacements run a half day to a full day depending on interior trim and exterior stucco work. We’ll give you the timeline in writing with your estimate.
We stock common ECO Window Systems-compatible balances, weatherstripping, and glazing beads on our trucks, and we source sashes and IGUs from local fabricators we’ve vetted. We also install and replace products from PGT, CGI, CWS, Mr-Glass, Therma-Tru, and ViewLux when a different product is the better fit. Call (559) 272-4716 and we’ll check inventory while you’re on the phone.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fresno at Meridian Windows and Doors Fresno, serving Fresno and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fresno
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.