New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fresno pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Window Replacement: The Fresno Owner’s Guide
CGI window replacement in Fresno typically runs $450 – $1,150 per window installed, depending on the series, glass package, and whether the frame needs reframing or just a sash swap. We stock CGI-compatible sashes, balances, locks, and weatherstripping on our trucks, so many single-window replacements are done in one visit. Most Fresno homeowners figure out something’s wrong when the window won’t stay up, a lock won’t engage, or the room starts feeling like a convection oven in July. That’s the moment to replace the failed part, not the whole wall of windows.
Which CGI Models This Applies To
CGI’s lineup splits into a few families you’ll actually see in Fresno homes. The Estate Series (often labeled ES-4000 or similar) is the workhorse single-hung and horizontal slider line. The Sentry Series leans toward impact-rated openings, and we see those more on homes built or retrofitted after tougher code cycles. The Targa and Esteem lines show up on newer spec builds on the northwest side. Here’s the compatibility gotcha many owners hit: CGI stamps the glass with an etched code, not a visible label on the frame. That etch sits in one corner of the glass and tells you the series, glass package, and date code. Without that code, a guess is a guess. The other identifier is the balance shoe, the plastic piece clipped inside the jamb track. CGI uses a specific shoe profile, and aftermarket shoes that claim to fit “most” brands won’t. We match the shoe before we order anything.
On OEM versus aftermarket for CGI specifically: OEM balances and locks cost 15 – 30% more than generic aftermarket parts, but they seat correctly and last longer than the universal-fit substitutes. For high-use windows in the Central Valley heat, we spec OEM more often than not. For cosmetic trim pieces and weatherstripping, a quality aftermarket match is usually fine and saves real money.
Signs Your CGI Window Replacement Is Failing
- The sash drops when you let go. The spring balance inside the jamb has lost tension or the shoe has cracked. This is the most common CGI failure in Fresno, because constant heat cycling weakens the spring steel faster than coastal air ever would.
- The lock engages but doesn’t actually hold. The keeper on the frame has worn or the lock pawl is rounded off. On CGI single-hungs, the cam lock is a known wear item after roughly 8 – 12 years of daily use.
- You can feel air moving around the closed sash. Weatherstripping has compressed or the pile strip on the sash has matted down. Fresno’s dry heat bakes the foam and felt strips brittle, and once they crack, the seal is gone.
- The window is hard to slide or tilt. The shoe is binding in the track, or the track itself has picked up grit and scored the vinyl. Forcing it usually snaps the shoe and sends the sash into freefall.
- Condensation or haze between the glass panes. The insulated glass unit’s seal has failed. CGI warrants the IGU for a set term, but older units out of warranty need a glass-pack replacement, not just a hardware swap.
Replacement Cost & What’s Included
| Service | Typical Installed Price in Fresno |
|---|---|
| Single balance or shoe replacement | $95 – $180 |
| Lock or keeper replacement | $75 – $150 |
| Weatherstripping refresh (per window) | $85 – $160 |
| Full hardware kit (balances, locks, weatherstrip) | $220 – $400 |
| Insulated glass unit replacement | $350 – $650 |
| Complete single-window replacement | $450 – $1,150 |
What drives the range is the series. Estate hardware sits at the lower end, Sentry impact-rated parts at the upper end. Glass packages with low-E and argon run more than clear glass. Every job gets a written line-item price before we touch the window, and the work is covered by the 365-Day Done Right Promise: if the part or the install fails within a full year, we come back at no charge. No fine print about labor exclusions.
DIY or Call Us?
You can safely do one thing yourself: get the glass etch code off the corner of the window and measure the visible glass width and height. Having both before you call saves a second trip. What you should not do is attempt to replace the balance or the shoe yourself. These are spring-loaded, under tension, and the vinyl jamb liner hides the parts you’d need to release. A wrong move puts a spring-loaded shoe into a finger, or drops the sash onto the sill hard enough to crack the frame. This is the one repair where we tell homeowners to leave the ladder in the garage. If you’ve already got the window open and can see a cracked shoe or a dead spring, call us at (559) 272-4716 and we’ll match the part to your exact CGI series, not a “close enough” universal.
FAQs
CGI frames and sashes routinely last 25 – 35 years in Fresno, but hardware items like balances and locks typically need replacement every 8 – 12 years. The glass units depend on exposure; west-facing windows on the Bluffs lose their seals faster than shaded north-facing ones. Call (559) 272-4716 if you’re seeing failure at the 8-year mark, and we’ll quote the exact part.
Weatherstripping and tilt latches can sometimes be cleaned and re-seated, but balances, shoes, and failed glass units are replace-only; they are not repairable once they fail. We’ll tell you which is which before any money changes hands. For an honest assessment, call (559) 272-4716.
A single-sash hardware replacement usually takes 45 – 60 minutes on site. An insulated glass unit replacement runs closer to 90 minutes including removal and re-glazing time. If we have the matched part on the truck, it’s one visit. Estimate the job is done same-day in most cases; call (559) 272-4716 to confirm availability for your series.
We carry the most common CGI balances, shoes, cam locks, and weatherstripping profiles on our service trucks around Fresno, and special-order the less common Sentry and Targa parts with confirmed lead times. We also stock compatible parts for PGT, CWS, and ES Windows for homes with mixed-brand installations. Call (559) 272-4716 with your glass etch code and we’ll confirm what’s in stock.
Meridian Windows and Doors Fresno is an independent service provider; we are not affiliated with CGI or its parent company. We replace CGI parts because we know them, not because the factory pays us to.
Elliot Vance dug his first window track out of a 1987 frame in Los Angeles and has kept a written labor warranty on every job since. A meridian is a fixed line you measure everything against; that is what the name means and how we run every install. Measure twice, install once, write it down.
Need a CGI-compatible replacement part matched to your exact series? Call (559) 272-4716 for a free estimate and a written price before any work starts. A live person answers, day or night.
Written by Elliot Vance, Owner, Meridian Windows and Doors Fresno at Meridian Windows and Doors Fresno, serving Fresno and nearby areas.
Six Reasons Homeowners Choose Meridian Windows and Doors Fresno
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.