New windows and doors improve comfort, cut energy bills and add long-term value to your home. Meridian Windows and Doors Fresno pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Installation Across Clovis
Window installation in Clovis, CA typically runs $450 – $1,400 per opening for standard replacement work, depending on the window type and what we find when the old unit comes out. Most single-family jobs in Clovis are completed in one to three days. If you’re in the Original Townsite, Harlan Ranch, or the east-side subdivisions, call (559) 272-4716 for a written estimate before any work begins.
We work in Clovis every week, and we know the housing stock block by block: 1960s ranch homes off Pollasky Avenue, 1980s stucco tracts near Buchanan High, and newer builds east of Clovis Avenue. Local experience matters when the wall comes open, because what’s behind the drywall in a 1963 Clovis home is not the same as what you’ll find in a 2010 build. Our Window Installation team writes the price down before the first screw turns, and the written price does not move at the door.
Why Meridian Windows and Doors Fresno Is Clovis’s Preferred Window Installation Company
Meridian Windows and Doors is part of the Garrison Partners family and has been held to The Garrison Standard since 2009. That standard is not a slogan; it’s a set of written expectations for pricing, scheduling, site conduct, and warranty response. Clovis homeowners call us because we answer the phone with a live person, every hour of the day, and because our pricing practice is simple: the number goes on paper before any work starts and it stays there.
Elliot Vance leads our installation work across Clovis. Every technician who walks onto a Clovis jobsite is background-checked and wears a Meridian uniform, so you know exactly who is at your door. Every install is covered by our 365-Day Done Right Promise, in writing: if the work fails within a year, we come back and fix it at no charge. No labor exclusions, no fine print about the sill caulk.
Casement Windows in Clovis
Casement window replacement in Clovis is a common fix for homes with original 1950s aluminum sliders that have corroded at the corners. A casement is a side-hinged sash that cranks outward, and it seals tighter against the frame than a slider ever can. At Meridian, we would often spec a casement here precisely because the compression seal performs well in Clovis’s hot, dry summers: when the temperature hits 104°F on a July afternoon, a casement closes against its weatherstripping instead of sliding past it.
For a standard Clovis ranch home, expect to pay $600 – $1,200 per casement window installed. That includes removal of the old aluminum or single-pane unit, jamb repairs if needed, new trim, and exterior caulking. In Original Townsite homes, where the overlay zone may require matching the original sightline, the number can push toward $1,400 once custom jamb work is written into the change order.
Where casements earn their price in Clovis
East-facing bedrooms in the Ranchwood and Quail Lakes subdivisions get direct morning sun and a lot of north wind. A casement’s full-perimeter seal is the practical answer. We’ve replaced dozens of leaky aluminum sliders with CWS casement units in those neighborhoods.
The permit trigger to know before buying
If your home is inside the Clovis Original Townsite overlay zone, the permit review can require keeping the original narrow sightlines. That often means a custom jamb retrofit, not a standard frame swap. We handle that paperwork and build the retrofit to match. You’ll want a contractor who has done it in Clovis before, not one who is learning the code on your wall.
Double Hung Windows in Clovis
Double hung windows are the most common replacement style in the 1960s – 90s ranch homes that fill Clovis’s central neighborhoods. Both sashes move vertically, so you get ventilation from the top or bottom. In Clovis’s tule fog winters, when moisture hangs against the glass for days, a double hung lets you open just the top sash to vent the house without directing cold, damp air across the floor.
Price in Clovis runs $450 – $900 per double hung installed. That’s for a standard retrofit into an existing frame with no structural surprises. In homes where the original 2×4 framing was undersized for today’s design pressure requirements, the job can require additional structural blocking, which we quote and approve in writing before any lumber is cut.
Ventilation that works with valley heat, not against it
Clovis summers often stay above 90°F well past sundown. A double hung allows what the old aluminum sliders couldn’t: ventilation from the top, where the air is warmest, and bottom, where the night air starts to cool. In August, that matters.
What we find behind 1970s drywall
When an older Clovis home has never had its windows replaced, the jamb pockets often hide dry rot from decades of fog condensation running down the glass and into the frame. We inspect before we quote, and we write the repair scope into the original estimate so there’s no surprise number after demo day.
Trusted Brands We Service in Clovis
We’re authorized to install and replace products from PGT, CGI, CWS, ES Windows, and four other manufacturer lines. We do not push one brand onto every Clovis home. A 1963 ranch with narrow Original Townsite sightlines gets a different spec than a 2008 east-side stucco home looking for low-E double panes. For Clovis jobs, we commonly order PGT for impact-rated replacements, CWS for casement work where the seal matters most, and ES Windows when a homeowner wants a specific frame profile. Parts arrive on a regular delivery schedule to our Central Valley metro office, coordinated from the Fresno office, so Clovis installations rarely wait on hardware.
Common Window Installation Problems We See in Clovis Homes
- 1950s aluminum sliders sweating and corroding at corners. The Original Townsite homes built during the post-war boom used single-pane aluminum frames with no thermal break. Tule fog condenses on the aluminum, runs into the corners, and corrodes the track over decades. By the time we’re called, the sash often drags or won’t lock.
- Seal failure and fogged double panes in 1980s – 90s subdivisions. Homes east of Clovis Avenue built with the first generation of vinyl windows are now hitting the 30-year mark where double-pane seals release. You’ll see condensation between the panes that no amount of cleaning resolves.
- Undersized 2×4 framing in ranch-era openings. Clovis ranch homes frequently framed windows with 2×4 headers that do not meet current design pressure requirements. Once the wall is open, the permit upgrade is mandatory. We account for this in the original written estimate, not as a surprise add-on.
- Dry rot behind stucco returns. Failed waterproofing on 1980s east-side stucco homes allows moisture to sit behind the window return and rot the framing unseen. The first visible sign is often flaking paint or a soft spot near the lower corner. Opening the wall is when the real scope appears.
Pricing for Window Installation in Clovis, CA
Window installation in Clovis runs roughly $450 – $900 per double hung, $600 – $1,200 per casement, and $900 – $2,400 for a large picture or bay unit, installed. Single-hung and horizontal rollers fall between $400 and $800 per opening in most Clovis neighborhoods. What moves the number in Clovis specifically is the age of the home: a 1955 Original Townsite house with custom sightline requirements and jamb rot will run higher than a 2015 east-side home with clean openings. Every quote is a written, line-item estimate delivered before any work starts. Call (559) 272-4716 and we’ll schedule a measure.
We Also Serve Cities Near Clovis
Our crews serve Clovis and the surrounding Central Valley communities: Window Installation in Clovis, Fresno, Sanger, Fowler, and Madera. If you’re just outside the Clovis city line, call and ask; the dispatch schedule covers most of the east side of the metro, and we’ll tell you straight if we can get there this week.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Installation in Clovis
Yes. The Clovis Original Townsite overlay zone requires exterior alterations to preserve the original 1950s character, and when windows are replaced, the permit review frequently triggers a requirement for impact-rated glazing with a laminated interlayer. This is not a state-wide rule; it is specific to that overlay zone. We handle the permit and write the glazing upgrade into the estimate before work starts. Call (559) 272-4716 for an exact quote on your address.
The San Joaquin Valley’s tule fog sits dense and cold against the glass while your interior air stays warm and humid, so condensation forms on the aluminum frame. Aluminum has no thermal break, so the moisture runs into the corners and attacks the track. Over years, that’s the corrosion you see. We see this on nearly every original aluminum window we remove in Clovis. Replacements with a thermal break, like vinyl, fiberglass, or thermally broken aluminum, stop the condensation pattern. Call (559) 272-4716 for an estimate.
Usually no, if you’re inside the Original Townsite overlay zone. The original aluminum sliders had very slim frames, and today’s standard replacement windows have wider profiles. Matching the sightline typically means a custom jamb retrofit, rebuilding the interior and exterior stops to accept a narrower-sightline sash. We’ve done this on Pollasky Avenue and the surrounding streets. We quote the retrofit as a written line-item, so you see exactly what it costs before the first cut. Call (559) 272-4716.
We stop work on that window and write a change order. You see the condition, you see the repair scope, and you see the number before we continue. That is the Meridian difference: the surprise is priced and approved in writing, not billed after. On east-side 1980s stucco homes near Buchanan High, we’ve found dry rot traveling two studs over from the window opening. We cut out the damaged lumber, install pressure-treated blocking or new framing, and rebuild the waterproofing. Call (559) 272-4716 for a free estimate.
Yes. The Original Townsite overlay zone applies stricter exterior alteration rules tied to the historic character of the district, and the permit process often enforces higher structural standards, including design pressure ratings, than the newer east-side subdivisions where standard residential codes apply. We submit design pressure documentation with every Clovis permit application. Our warranty on the installation itself is a written 365-Day Done Right Promise. Call (559) 272-4716 and we’ll walk you through your specific address.
Written by Elliot Vance, Owner at Meridian Windows and Doors Fresno, serving Clovis since 2009.
Six Reasons Homeowners Choose Meridian Windows and Doors Fresno
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.